ATU Infohub Home
→
Faculty of Engineering
→
Department of Electrical / Electronic Engineering
→
Browsing Department of Electrical / Electronic Engineering by Author

Browsing Department of Electrical / Electronic Engineering by Author "Pan, J."

Now showing items 1-9 of 9

The characteristics of pure heterogeneous reaction for H2/Air mixture in the micro-combustors with different thermophysical properties.

Zhang, Y.; Pan, J.; Lu, Z.; Tang, A.; Zhu, Y.; Bani, S. (Applied Thermal Engineering, 2018)

This paper investigated the characteristics of pure heterogeneous reaction for H2/Air mixture under different wall thermophysical conditions namely; thermal conductivity, convective heat transfer and thermal capacity. The ...
Combined effect of injection timing and injection angle on mixture formation and combustion process in a direct injection (DI) natural gas rotary engine

Fan, B.; Pan, J.; Yang, W.; Pan, Z.; Bani, S.; Chen, W.; He, R. (Energy, 2017)

The application of direct injection (DI) technology is considered as a key solution to the problems of combustion efficiency and emissions on the rotary engine. This work aimed to numerically study the combined effect of ...
The effect of embedded high thermal conductivity material on combustion performance of catalytic micro combustor.

Zhang, Y.; Pan, J.; Zhu, Y.; Bani, S.; Lu, Q.; Zhu, J.; Ren, H. (Energy Conversion and Management, 2018)

A novel micro combustor embedded with high thermal conductivity material has been proposed for micro-thermophotovoltaic system application. The effect of the materials, which is graphite and nickel with widths 1 mm and ...
Effects of inlet parameters on combustion characteristics of premixed CH4/Air in micro channels.

Zhang, Y.; Pan, J.; Tang, A.; Lu, Q.; Zha, Z.; & Bani, S. (Journal of the Energy Institute, 2019)

In order to improve the stability of combustion and the working performance of the micro-combustor, this paper focuses on the effects of inlet parameters such as inlet temperature, mass flow rate and equivalence ratio. ...
Experimental investigation on the combustion characteristics of premixed CH4/O2 flame in a micro plate channel.

Zha, Z.; Pan, J.; Yang, W.; Lu, Q.; Bani, S.; Shao, X. (Energy Procedia, 2017)

The combustion characteristics of premixed rich CH4/O2 in micro channel was investigated experimentally via the visual micro-scale combustion test bench. The flammability limits, flame behaviors, stability limits and flame ...
Hetero-/homogeneous combustion characteristics of premixed hydrogen-air mixture in a planar micro-reactor with catalyst segmentation

Pan, J.; Lu, Q.; Bani, S.; Tang, A.; Yang, W.; Shao, X. (Chemical Engineering Science, 2017)

Numerical simulation of stoichiometric hydrogen-air premixed flame in a platinum-coated micro channel was performed to investigate hetero-/homogeneous combustion characteristics. An elliptical two-dimensional (2D) Computational ...
The influence of injection strategy on mixture formation and combustion process in a direct injection natural gas rotary engine.

Fan, B.; Pan, J.; Yang, W.; Chen, W.; Bani, S. (Applied Energy, 2017)

The application of direct injection (DI) technology is considered as an effective way to improve the performance of the rotary engine. This work seeks to numerically dissect the influence of injection strategy on mixture ...
Micro combustion in a porous Media for thermophotovoltaic power generation.

Bani, S.; Pan, J.; Tang, A.; Lu, Q.; Zhang, Y. (Applied Thermal Engineering, 2018)

This work delved into porous media combustion (PMC) TPV with H2/O2 as fuel with much focus on experiment and numerical assessment of the TPV generator. The effects of some major parameters on PMC namely flow velocity, ...
Numerical investigation of key parameters of the porous Media combustion based micro-thermophotovoltaic system.

Bani, S.; Pan, J.; Tang, A.; Lu, Q.; Zhang, Y. (Energy, 2018)

Power generation with porous media driven Micro-Thermophotovoltaic (MTPV) was investigated and effects of changes to key parameters of the system investigated. The micro combustor had the dimensions of length–15 mm, ...

Browsing Department of Electrical / Electronic Engineering by Author "Pan, J."

Browsing Department of Electrical / Electronic Engineering by Author "Pan, J."

Search ATU Infohub

Browse

All of ATU Infohub

This Community

My Account